5057 Amine Type Antioxidant Lubricant Antioxidant For Industrial Greases And Fuel Oils
Basic Spec
Reaction product of N-phenylaniline with 2,4,4-trimethylpentene
antioxidant ODP; antioxidant 5057; lubricating oil extrusion anti-wear additive BTMT (hindered phenol thiadiazole derivative ); Antioxidant AO-5057
English name: Antioxidant 5057
CAS No.: 68411-46-1
Molecular formula:
Molecular weight: 393.655
EINECS number: 270-128-1
Related Categories: Plastics and Products; Plastic Antioxidants; Antioxidants
Chemical Name:Benzenamine, N-phenyl, reaction products with 2,4,4-trimethylpentene
Physical Property & Specification
Antioxidant 2246 is a white or milky white crystalline powder having a melting point of 120-130 °C. Density 1.04-1.09. Soluble in organic solvents such as ethanol, acetone, benzene, petroleum ether, insoluble in water. Slightly phenolic. This product is non-toxic and has good storage security. Long-term placement is reddish, but does not affect its anti-oxidation and anti-aging properties in oil, rubber and plastics.
Chemical name: reaction product of N-phenylaniline and 2,4,4-trimethylpentene
CAS: 68411-46-1
Specifications: Appearance: light yellow viscous liquid
Chroma: 18max
Nitrogen content: 4.3-4.8%
Water content: 0.1% max
Diphenylamine content: 1.5% max
Viscosity (40DC): 100-500cst
Transmittance (@425nm): 92%min
Storage and transport: Keep containers tightly closed to avoid ingestion and inhalation.
Packing: 25kg drum or according to customer requirements.
Physical Specification
| Spec |
Unit |
Result |
| Appearance |
|
Light or dark amber liquid |
| Diphenylamine% |
% |
≤0.1 |
| Chroma |
Garndner |
≤18 |
| Nitrogen content% |
% |
4.0-5.0 |
| Viscosity(40℃) |
|
≤600 |
| Assay |
% |
≥97.00 |
Introduction of antioxidant 5057
1. Approved by the US Food and Drug Administration FDA/USA under 21CFR 178.3570, which can be used to blend US Department of Agriculture USDAH-1 accidental food contact grease, with a maximum limit of <0.5%.
2, can bring high total base number (TBN = 180) and high active nitrogen content
3. Effectively control the viscosity growth caused by oxidation and prolong the service life of oil
4, good sealing material compatibility, no thinner
5. It has significant synergistic effect with iragnox L135 in various base oils.
Main Functions:
●Liquid octyl/butyl diphenylamine antioxidants, mainly used in lubricating oils
●High nitrogen content
● can effectively control the increase of viscosity of lubricating oil due to oxidation
● can effectively prevent thermal oxidation degradation of lubricating oil
● Mainly used in mineral oil-based industrial lubricants, synthetic industrial lubricants, greases and engine oils
Applicable products and instructions for use
|
Mineral oil based industrial lubricants
|
0.1-0.5%
|
|
Synthetic industrial lubricants and greases
|
0.3-1%
|
|
engine oil
|
0.3-1%
|
Applications:
This product has good performance , completely suitable for polymer preparation and processing during the entire process. For upholstered polyurethane foam stabilization, it can effectively inhibit peroxide formation in storage and transportation. Further prevent foaming in the coke burning phenomenon; In addition, when using a soft foam polyurethane (pu) in automobile manufacture, furniture and fabric industry, Chic5057 its low volatility, low atomization will avoid damage to fabric color pollution. Its performance with other types of phenolic antioxidants such as 1135, or in connection with stabilizer (e.g., phosphite ester, thio ester, hydroxylamine, lactone) and light stabilizer (such as ultraviolet absorbent, HALS). Its superior performance can be further play. Use for polyurethane plastic, fiber, elastomer and so on.
Packing & Storage
Packing: 190KG / barrel
This product is non-flammable, non-explosive, and non-corrosive. When used, general precautions for handling concentrated chemicals and adding additives to base oils should be followed. If contact with skin, wash thoroughly with detergent, soap and water.
Payment Terms
100% TT Before Shipment
Contact Information
| Tel |
0086 134 35409275 |
| Fax |
0086 757 84888673 |
| Mobile |
0086 13670617610 |
| E-mail |
frank@jasontechcn.com |
| Skype |
frank_shuai |
| WhatsApp/Viber |
+86-13435409275 |
FAQ
1. Are you a factory or tarding company?
Our company concentrates on on the production, sales and service for plastic and coating additives, fine chemicals and intermediates.
2. Where dose your company locate?
We locate in Heze, Shandong province of China, also have sales rep. in Foshan
3. Can you provide samples for quality checking before placing an order?
Samples are avaliable upon request, but the shipping cost should be paid by customer.
4. How to get the price list?
Please inqire us by alibaba/email.
5. What's your payment term?
TT/Payoneer/Paypal/West Union
