Colorless Powder Polymer PAM Flocculation Chemical For Textile Sizing Agent Paper Mill

Basic Specification:

Summery of Polyacrylamide In Different Formula

Advantage of Our Polyacrylamide(PAM)

• Economical to use - lower dosage levels.

• Easily soluble in water; dissolves rapidly.

• Non corrosive of suggested dosage, economical and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Reduction in sludge of dewatering process system.

Introduction Of  Cationic PAM

Cationic polyacrylamide (CPAM) is a linear polymer compound. Because it has a variety of active groups, it can affinity with many substances and adsorb to form hydrogen bonds. It is mainly a colloidal negatively charged colloid with functions such as turbidity removal, decolorization, adsorption and adhesion. It is suitable for organic colloidal content in dyeing, paper making, food, construction, metallurgy, mineral processing, coal powder, oil field, aquatic product processing and fermentation. High wastewater treatment, especially suitable for dewatering of municipal sewage, municipal sludge, paper sludge and other industrial sludge.

Application and Dosage

1. Mainly used as flocculant: for suspended particles, coarser, higher concentration, positively charged particles, water PH value is neutral or alkaline sewage, because the anionic polyacrylamide molecular chain contains a small amount of polar groups to adsorb water suspension The solid particles cause bridging between the particles to form large flocs. Therefore, it accelerates the sedimentation of the particles in the suspension, and has a very obvious effect of accelerating the clarification filtration of the solution. This product is widely used in chemical industry wastewater, waste liquid treatment, municipal sewage treatment. Water treatment in tap water industry, high turbidity water purification, sedimentation, coal washing, mineral processing, metallurgy, steel industry, zinc, aluminum processing industry, electronics industry;
2. Used in petroleum industry, oil recovery, drilling mud, waste mud treatment, prevention of waterlogging, friction reduction, enhanced oil recovery, and tertiary oil recovery.
3. It is used for textile sizing agent, stable slurry performance, less slurry falling, low fabric breakage rate and smooth surface.
4. Used in the paper industry, the first is to increase the retention rate of fillers and pigments. To reduce the loss of raw materials and environmental pollution; the second is to improve the strength of the paper (including dry strength and wet strength), in addition, the use of PAM can also improve paper tear resistance and porosity to improve visual and printing performance, also used In food and tea wrappers;
5. In other industries, the food industry is used for the clarification of cane juice and the extraction of syrup phosphorus floatation in the production of cane sugar and beet sugar. Enzyme preparation fermentation liquid flocculation clarification industry, also used for recovery of feed protein, stable quality, good performance, recovered protein powder has no adverse effect on chicken survival rate and weight gain, egg production, synthetic resin coating, civil grouting material blocking Water, building materials industry, improving cement quality, construction industry adhesives, caulking repair and water blocking agent, soil improvement, electroplating industry, printing and dyeing industry, etc.;

The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage.

Jar Test

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Precautions

1. The operator should wear protective equipment. After skin contact, wash it with water;

2, the use of the site, if there is a small amount of leakage, can be washed with a large amount of water; such as a large number of leaks, first sweep and then rinse with a large amount of water, emergency can be sprinkled with a large amount of yellow sand to prevent slipping injuries;

3. This series of products should be sealed thanks to the cool and dry place to prevent moisture;

4. The storage period is one year.

Instruction of Use

1. Dissolution method: Before use, dissolve the solid particles into an aqueous solution of 1‰--5‰ concentration, so as to quickly exert its effectiveness. In the dosing, the method of gradually taking the family medicine should be adopted, and the water should be slowly poured into the water. Disperse evenly in water and dissolve.
2. Stirring with a stirrer, and pouring the weighed polymer flocculant calmly and rapidly along the vortex edge generated by the stirring. It is very important that the polymer flocculant is completely mixed with the solvent before the viscosity of the solution becomes large.
3. Add water to the specified location and adjust to a specific concentration.
4. Continue stirring until the high molecular weight flocculated polymer is completely dissolved.