Heat Reflective Roof Cooling , Roof Tile , Heat Insulating Paint , Building Roof Paint
Basic Spec
Our Reflective Heat Insulation Coating/Paint is mainly prepared by,
| Composition of our Reflective Heat Paint | |
| · Special Resin | · Microscale hollow glass beads |
| · Anti-Rust Pigments | · Organic Solvent |
Product Application
The coating can effectively insulate and reflect heat to achieve cooling effect. It is typically used for,
· Metal oil tank
· Tank truck
· Chemical pipeline
· Refrigerator truck
· LPG container
· Roofing
Physical Property & Specification
Detailed Data Sheet
| Color | White, Aluminum silver |
| Gloss | Matte |
| Density, kg/L | 0.7 |
| Coverage, g/m2 | 153 |
| Flash point, oC | 31 |
| Film thickness, μm, Wet | 110 |
| Film thickness, μm, Dry | 30 |
| Application method | spray, brush and roller |
| Thinner | exclusive thinner |
| Drying time @ 23±2 ℃ | Surface dry: 1h, Hard dry: 24 h, Fully cured: 7 d |
1, heat insulation, sun protection, cooling effect is good, the sun is drying all day, the surface of the coating is still cool and not hot, the energy saving rate is over 58%.
2, environmental protection: the product is water-based, ultra-low VOC does not add harmful substances such as cadmium, lead, chromium, etc., is a green low-carbon product.
3, weather resistance is very strong: the coating can withstand all kinds of bad weather test, tough, no cracking, no skin, not easy to age, effective
It prevents leakage, water scouring, excellent UV resistance and long life of more than 10 years.
4, good adhesion: after the paint is applied, there will be no cracks, peeling, falling off or chalking.
Quality & Standard
- In line with GB/T25261-2010 "reflective thermal insulation coating for building" JC/T235-2008 "architectural reflective thermal insulation coating" Alkali resistance 48h no abnormality Water resistance 168h no abnormality Washing resistance
- 1000 times Stain resistance (white and light) ≦12% Salt spray resistance 100h no abnormality Thermal conductivity 0.035w/m.k
- Aging resistance 240h No blistering, no peeling, no cracks Solar reflectance ≧0.86 Hemispherical reflectivity ≧0.84
Introduction of Heat Reflective Paint
The intelligent reflective thermal insulation coating is made of imported international thermal insulation materials, TAO, Glass beads and self-crosslinking polymer. After the coating film is formed, the heat reflection and heat insulation efficiency is high, the weather resistance and the stain resistance are good, and the surface temperature of the wall can be effectively reduced, which is suitable for application in various building energy-saving projects. It is a new energy-saving coating that integrates reflection, radiation and barrier functions. The coating can reflect more than 85% of solar radiation and near-infrared light in the range of 400~2500nm (the solar reflectivity is 0.85), effectively preventing the heat accumulation of sunlight. At the same time, a thermal resistance material with extremely low thermal conductivity is added to the coating to effectively block the transfer of thermal energy. In the hot summer, the violent sun light does not make the coating hot, and its surface feel is cool. Simply apply a thin layer of reflective insulation on the roof and walls to share the cool world!
Instruction for Use
Add 10-20% clean tap water and mix slowly with direct spray gun spray or roller coating, wool brush brush 2 times, interval no less than 2 hours construction twice, no air spray effect is better, different projects according to our construction plan construction.
Packing & Storage
net weight 19L/Bucket.
Store in a cool, dry, well-ventilated area away from sunlight.
Payment Terms
100% TT Before Shipment
Certificates
