Translucent Heat Insulation Paint Coating 20l Exterior Wall Tile Insulation Paint RPM 802

Translucent Tile Insulation Coating 20l Exterior Wall Tile Insulation Paint RPM 802

Quick Review:

	RPM802 intelligent HEAT reflective waterproof paint coating
Product specifications	20L / barrel
Usage	the top floor of the building is suitable for concrete waterproofing, insulation, and insulation.
	The main effect of the top floor of the building dedicated to the concrete waterproof insulation triple-component water-based slurry coating,
Coating method	surface coating
Whether color ajusted	No
Brushing area	2.5-3KG / sqm
Drying time	dry <2 hours
construction methods	Spray paint brush roller
Features	Features easy to permanently solve the top of the building seepage, high temperature problems.
Advantages	Insulation and waterproof. Facilitate construction

Product Standards:

The main technical indicators are superior to the GB/T9755-2001 standard.

 

Construction points:

1. This product requires the base layer to be dry, the water content is less than 10%, the floating dust should be removed before painting, and the base layer should be flat and free of empty drums;

2. The new wall transparent insulation and waterproofing project should first handle the surface base layer. Before spraying, the wall surface dust should be cleaned, and then sprayed according to the method of 0.15kg-0.20kg per square.

3. The new and old wall insulation and waterproof construction requires the base layer to be flat, and it is applied twice in a dosage of about 0.3kg per square meter.

 

Precautions:

 

1. The construction temperature should not be lower than 5 degrees Celsius, and it should not be constructed on rainy days;

2. Before it is completely cured, it is not suitable to trample to prevent defects;

3. The roofing waterproofing project has a curing period of seven days (25 degrees Celsius) after

construction;

 

Packaging, transportation, storage

1. The product is packed in color printing drums, and the warranty period is 2 years from the date of leaving the factory;

2. This product is water-based paint, non-toxic, transported according to non-dangerous goods;

3. Store in a cool, ventilated place, avoid exposure, ambient temperature > 5 degrees Celsius < 40 degrees Celsius

Paint characteristics

1. The construction method of this product is similar to the construction method of ordinary exterior wall coating. The bottom and topcoat construction is equivalent to the ordinary outer wall bottom and topcoat.

2, excellent thermal insulation function: This product has excellent performance in blocking solar radiant heat or suppressing infrared radiant heat, and its thermal insulation performance is much better than other materials under the same thickness.

3. Excellent performance: Most of the raw materials used in this product are inert chemical substances, which are not corrosive by themselves; its coating directly adheres to the surface of the insulator, and contains no air in the middle, which can effectively block condensation and intrusion of water vapor, which can effectively The surface of the protected object is not oxidized, thereby achieving the purpose of preventing corrosion.
4. Economical and durable: The effective service life of this product can reach 15 years. Its comprehensive cost is lower than conventional anti-corrosion and heat insulation materials, high performance and price ratio, economical and practical.

Painting technology characteristics

1. Good environmental friendliness: This product is ultra-low VOC, free of volatile carcinogens and other harmful compounds, will not pollute the environment, will not cause harm to the health of construction workers, and is a green product.
2. Strong adhesion and high and low temperature resistance: This product is only required to be coated according to the requirements of construction specifications of exterior wall coatings. The adhesion of the coating film is strong, and there will be no loosening or falling off of the coating. Film-forming products are resistant to high and low temperatures

3. Good weather resistance, acid and alkali resistance.

4. High elastic effect and ductility, elongation at break is 676% (national standard is ≥100%), effectively covering and repairing slight cracks on the surface of the building.

Certificates

Dosage: about 1L/m2 per 1mm thickness

Packing specification: 8kg / barrel, 20 kg / barrel

Storage: sealed, stored in a cool dry place, storage period of one year.

Contact Information

Payment Terms

100% TT Before Shipment