Features of our defoamer:
1. Fast defoaming and good antifoaming performance.
2. Does not affect the basic properties of the foaming system.
3. Diffusion and permeability are good.
4. Chemically stable.
5, no physiological activity, no corrosion, no toxicity, no adverse side effects, non-combustible, no explosion, high safety.
Packaging stored
Use 200 l iron bucket or plastic bucket packaging, finished products storage and transportation should be far from the source of fire, placed in a ventilated and cool place, light loading and unloading, prevent damage to the packaging bucket.This product has a shelf life of two years.
About defoaming agent
Defoamers are mostly liquid compound products, which are mainly divided into three categories: mineral oils, silicones, and polyethers. Mineral oil defoamers usually consist of a carrier, an active agent and the like. The carrier is a low surface tension substance, and its role is to carry and dilute. The commonly used carrier is water, fatty alcohol, etc.; the active agent acts to inhibit and eliminate foam, and commonly used wax, aliphatic amide, fat and the like. The silicone-based antifoaming agent generally includes polydimethylsiloxane or the like. Silicone defoamers have poor solubility, and have good defoaming speed and good antifoaming at normal temperature, but they are characterized by delamination at high temperature, slow defoaming speed, and poor foam suppression. The polyether antifoaming agent includes polyoxypropylene oxyethylene glyceryl ether and the like. The polyether antifoaming agent has the characteristics of long antifoaming time, good effect, fast defoaming speed and good thermal stability. For example, in the production process of fruit and vegetable beverages, soy products, sucrose, etc., defoamers are used.
Application
Mainly applicable to circuit board (PCB) process; chemical; electroplating; printing and dyeing; papermaking; medicine; water-based ink; ceramic slitting; steel plate cleaning; aluminum processing; various sewage treatment and various industrial water systems Bubble and antifoam.
Instructions
1. contact personnel should wear protective equipment when using non-ionic polyacrylamide, skin contact area should be immediately washed with clean water.
2.keep dry bath, non-ionic polyacrylamide to avoid sprinkling on the ground, if wet and slippery, clean up in time to prevent slipping.
3.try to prevent moisture absorption, sunlight exposure.
Factory show
Our company also exports products to all over the world,including to Philippines,Thailand,
India,Vietnam,Bangladesh,Chile,Brazil, Australia.
Highlights of our Factory
>> Top three factory: over 60,000 tons annual capacity;
>> Quality guarantee: ISO9001, ISO14001, OHSAS18001 certified;
>> Technical advantages: First and only one can produce both PAM and its raw material DAC in China;
>> Collinear production line: Flexible to adjust production.
